DCCconcepts DCC-ESPS.3 ESP® 3-Output DCC Transmitter

1x 3-Output ESP® DCC Transmitter

Very easy to use, this unit is the heart of ESP®.
DCC-ESPS.3 can be powered by a DCC track bus or with any regulated DC power source or battery able to deliver from 12 to 20 volts.
DCC-ESPS.3 has three inputs that can be connected to any form of detection or switch and three independent wireless outputs, each with its own DCC address.
The ESP® address range is from 1 to 2044.
To complete your wire-free installation, the DCC-ESPS.3 is paired with the DCC-ESPR.1 receiver which receives the commands and delivers them to your DCC system or control panel, either as a direct DCC command or as a “sniffer” device, so your screen-based DCC system can also receive feedback.
DCC-ESPS.3 can pair with multiple receivers.
Unlike Wi-Fi based systems, ESP® has no limits on the quantity of input channels and there is zero possibility of interference.
ESP® has full power-off memory and is also protected against wrong connections.

No wires. No effort. No problems.
DCCconcepts ESP® turns almost any switch, detector or similar device into a simple to address, wireless source. ESP® can trigger actions, give feedback or send DCC control commands without the need for any wires.
– No long wires
– No soldering
– No complications
– Usable in any scale
– Totally universal and exceptionally simple interface.
– Allows anything to communicate, command or report to anything
– Seamlessly usable with any DCC brand
– Simple to install on DCC, DC or AC powered layouts
– Equally comfortable on shunting planks and super-layouts
– Zero dependence on local Wi-Fi networks
– No complexity, routers, passwords or other arcane digital nonsense, but totally secure.
– Absolutely zero interference between layouts at exhibitions
ESP® is perhaps the first product to honestly address the promise made by DCC 35 years ago…