Remember: Free UK P&P for orders of £30+

DCCconcepts DCC-TS2SAP Small, thin 2-function Loco Decoder WITH 'Stay Alive'.

An exciting new release from DCC Concepts, bringing another level of quality, functionality and value-for-money to digital control.

7-pin removable JST Mini-harness with 8-pin plug.

Key Features:
- Decoder Size: 18.5mm x 10.5mm x 3.3mm
- 1 Amp continuous load, 1.5 Amp peak load
- 2x 200mA Function output
- Self-adjusting back EMF
- Supports both short and long addressing
- Silky smooth, quiet drive operation

Common to all DCC Concepts Loco Decoders:
* Direct easy connection to exclusive Stay-Alive device. 
* Super smooth high frequency silent drive motor control. 
* 2 or 4 digit addressing and 14, 28 or 128 speed steps. 
* Support for all common programming & consist modes. 
* Back EMF with step-variable or Fn button control. 
* Fully adjustable motor control and function actions. 
* Easily locked once adjustment or set-up is complete. 
* All special lighting effects available including Mars, Strobe, Alternating Ditch lights and Flickering Firebox. 
* All functions able to be re-allocated as required. 
* Heat-shrink insulated for short-free installation.

The TS Series decoders:

Made to be slim to fit thin, tight spaces, the TS series has its harness directly soldered to the decoder PCB,

removing the need for a connector and slimming it down significantly. It only sounds like a little difference... But in

reality, it is a huge difference that makes the TS series decoders installable in super-tight places including many,

many more N scale locomotives!

The locomotive end of the harness is an NMRA standard 8 pin plug, easily removed for hard-wiring. All of DCCconcepts's TS

series decoders are of course fitted with two extra colour-coded wires for connecting the DCCconcepts “Stay-

Alive” device.

TS series decoders are available in either 2 or 4 function and can be supplied individually or in economical 5-

packs, with or without Stay-Alive.

With the same generous high power handling as the S Series, TS Decoders will also work reliably with all but the

most current hungry loco’s in On30, HO, OO, TT ... And of course it will easily fit into many N scale locomotives.